Proportional Valve
Technical Article - Continued

Frequency Response and Hysteresis

High frequency response and low hysteresis are achieved by eliminating any metal-to-metal contact between the armature and its surroundings and minimizing the weight of the armature. In high performance valves, suspending the armature between a pair of thin, flat springs eliminates metal-to-metal contact.

In IQ Valves’s design no part of the magnetic circuit is captured between the two flat suspension springs. This simplifies the design, reduces the number of parts within the assembly and eliminates tight tolerances on those parts.

The weight of the armature assembly also plays a major role in the frequency response of the soleniod and the valve. In IQ Valves’s design, the suspended armature is optimized to occupy a minimum space thus reducing weight. Also other key parts in the suspending mechanism are made of inexpensive, light weight non-magnetic materials. This design yields a very high frequency response in excess of 250 Hz and a low hysteresis of 3-5 %.

Flow Rate

In the prior art, proportional valves were either designed for low flow or high flow but never both. IQ Valves has adapted this design to accommodate a wide range of flows with orifice sizes ranging from 0.032” to 0.625”.

The valve flow turn-down ratio (an indicator of the resolution of the valve) is in excess of 20,000 to 1. This means our valve can handle flows as high as 200 liters per minute but it can also accurately and proportionally control a flow as low as 10 cc/minute without losing proportionality or linearity.

Leakage and Other Design Features

The valve itself is a two-way poppet design with either metal or elastomeric poppet material. Leakage of bubble tight to 1cc/minute are typical. The operating pressures range from less than one PSI up to 250 PSI. IQ Valves’s design isolates the magnetic and electric components from the working medium by a separation diaphragm. This makes the valve suitable for both liquid as well as gaseous applications.

APPLICATIONS INFORMATION

IQ Valves’s new family of proportional valves are opening up applications where previously engineers “made do” with on/off valves. IQ Valves’s proportional valves are presently being used in the following applications.

Medical Respiratory Care Industry

IQ Valves’s proportional valve is presently being used in medical ventilator designs for use in hospitals. This is a typical application for a high performance proportional valve. Here a pair of valves are used in tandem to precisely meter, mix and deliver air and oxygen on demand in the right quantities. Ventilators typically have an on-board computer that determines the air/oxygen mix and sends a signal to the valves. As the valves respond to these command signals, the output flow is measured by a flow meter and fed back to the computer.

In this closed loop application these valves must meet very stringent requirements. A ventilator must be able to respond quickly to patient demands on a breath by breath basis. Our valves deliver a maximum flow rate of 200 LPM yet have the resolution of 0.01 LPM. IQ Valves’s valves are capable of meeting these requirements due to the linear proportional performance and the high frequency response of the solenoid.

Energy and Alternative Fuels Industries

IQ Valves’s proportional valve is utilized in the precise metering of fuel to a portable turbine engine used to generate electricity.. The same valve is suitable for diesel, gasoline, propane and natural gas. In this metering application the engine rpm is measured and fed back to the engine’s main computer and the computer sends command signals to the valve which in turn adjusts itself to meet the ever changing engine load requirements. For an example of flow rates, the natural gas flow rate varies anywhere from 10 scfm to 40 scfm.

In a second fuels application, our valve is used in a similar closed-loop system as just described but it is within a piston type engine. The valve is part of an air/fuel ratio controller used on stationary engines found at oil-well heads. These engines use raw fuel right out of the oil well which exposes IQ Valves’s valves to contamination so severe, actual pebbles have been found inside the valves. Yet, in spite of stones floating around in the flow path, these robust valves still function.

The fuel cell industry also uses IQ Valves’s proportional valves to meter fluids in both the fuel and water systems found within a typical fuel cell unit.

Additional Applications

Other current applications include water purification systems, mass flowmeters and oxy-acetelene welding.